• w-facebook
  • Twitter Clean
  • w-flickr

Polyurethane and Epoxy Casting Resin

Model-Pro is a two component polyurethane casting resin which exhibits good impact resistance and strength. It has a  low viscosity making it extremely easy to mix.  Model-Pro contains zero solvents making it virtually odorless and user friendly. It also contains no fillers and can be hand mixed or used with automated dispensing equipment. Product uses include: Casting models, protoypes, figurines, proofing molds, making reproductions, etc.. This is ideal resin for professional model makers, hobbists, crafters, and taxidermists.  Model-Pro turns from liquid to solid in 15 minutes and works excellent in rtv silicone molds. Watch Video

Product: Model-Pro

Mix Ratio: 1:1 by weight / volume

Working Time: 2.0 minutes

Demold Time: 15 minutes

Heat Deflection: 300 f

Shrinkage: .001

Color: Off-White or Black

Hardness: 75-D

Viscosity: 80 cps

SAFETY DATA SHEET

 

ORDER ONLINE

Model-Pro Slow is a two component polyurethane casting resin which has a longer working time for larger castings that require more time. Model-Pro-Slow comes in either a 6 minute working time or 12 minute working time. It exhibits good impact resistance, strength and has a low viscosity. Model-Pro Slow contains zero solvents making it virtually odorless and user friendly. It also contains no fillers and can be hand mixed or used with automated dispensing equipment. Product uses include: Casting models, prototypes, figurines, proofing molds, making plastic reproductions, etc.. This is an ideal casting resin for professional model makers, hobbists, crafters, and taxidermists.

Product: Model-Pro Slow

Mix Ratio: 1:1 by weight / volume

Working Time: 6 min. or 12 min.

Demold Time: 1.0 hour or 2 hour

Heat Deflection: 140 f +

Shrinkage: .001

Color: Off-White or Black

Hardness: 70-D

Viscosity: 150 cps

SAFETY DATA SHEET

ORDER ONLINE

Color-Pro is a two component casting resin which is semi-clear when cured, which makes adding pigments and dyes extremely easy. Color-Pro was designed to make bold colorful castings of models, prototypes, figurines, reproductions, etc.. Color-Pro has low viscosity, excellent impact resistance, and strength. It contains zero solvents making it virtually odorless and user friendly. It also contains no fillers and can be hand mixed or used with automated dispensing equipment. Product uses include: Casting models, protoypes, figurines, proofing molds, making reproductions, etc.. This is ideal resin for professional model makers, hobbists, crafters, and taxidermists.  Color-Pro will cure gradually in 15 minutes making it ideal for rotational casting applications. Watch Video

Product: Color-Pro

Mix Ratio: 1:1 by weight / volume

Working Time: 2.5 Minutes

Demold Time: 15 Minutes

Heat Deflection: 180 f +

Shrinkage: .001

Color: Semi-Clear or Black

Hardness: 75-D

Viscosity: 100 cps

SAFETY DATA SHEET

ORDER ONLINE

Fabri-Cast 50 is a two component polyurethane casting resin which exhibits good impact resistance and strength. It has a ultra-low viscosity (50 cps) making it extremely easy to mix and  excellent air release properties. Fabri-Cast 50 when cured is a bright white and virtually bubble free. Fabri-Cast 50 contains zero solvents making it virtually odorless and user friendly. It also contains no fillers and can be hand mixed or used with automated dispensing equipment. Product uses include: Casting models, protoypes, figurines, proofing molds, making reproductions, etc.. This is ideal resin for professional model makers, hobbists, crafters, and taxidermists.  Fabri-Cast 50 turns from liquid to solid in 15 minutes and works excellent in rtv silicone molds. Watch Video 

Product: Fabri-Cast 50

Mix Ratio: 1:1 by weight / volume

Working Time: 2.0 minutes

Demold Time: 15 minutes

Heat Deflection: 180 f +

Shrinkage: .001

Color: Bright White

Hardness: 75-D

Viscosity: 50 cps

SAFETY DATA SHEET

ORDER ONLINE

Flex-It 10 is a very flexible urethane casting resin designed for casting flexible molds, seals, gaskets, models, prototypes, parts, etc.. It has excellent tear strength, elongation tensile strength, and good chemical resistance.

Product: Flex-It 10

Mix Ratio: 1:1 by weight / volume

Working Time: 30.0 minutes

Demold Time: 24 Hours

Heat Deflection: 170 f 

Shrinkage: .001

Color: Semi-Clear or Black

Hardness: 10-A

Viscosity: 500 cps

SAFETY DATA SHEET

ORDER ONLINE

Flex-It 40 is a flexible urethane casting resin designed for casting flexible molds, seals, gaskets, models, prototypes, parts, etc.. It has excellent tear strength, elongation, tensile strength, and good chemical resistance.

Product: Flex-It 40

Mix Ratio: 1:1 by weight / volume

Working Time: 15.0 minutes

Demold Time: 5.0 Hour

Heat Deflection: 170 f 

Shrinkage: .001

Color: Semi-Clear or Black

Hardness: 40-A

Viscosity: 600 cps

SAFETY DATA SHEET

ORDER ONLINE

Flex-It 50 is a flexible urethane casting resin designed for casting flexible molds, seals, gaskets, models, prototypes, parts, etc.. It has excellent tear strength, elongation, tensile strength, and good chemical resistance.

Product: Flex-It 50

Mix Ratio: 1:1 by weight / volume

Working Time: 15.0 minutes

Demold Time: 5.0 Hour

Heat Deflection: 170 f 

Shrinkage: .001

Color: Semi-Clear or Black

Hardness: 50-A

Viscosity: 650 cps

SAFETY DATA SHEET

ORDER ONLINE

Flex-It 70 is a  flexible urethane casting resin designed for casting flexible molds, seals, gaskets, models, prototypes, parts, etc.. It has excellent tear strength, elongation, tensile strength, and good chemical resistance.

Product: Flex-It 70

Mix Ratio: 1:1 by weight / volume

Working Time: 6.0 minutes

Demold Time: 2.0 Hour

Heat Deflection: 170 f 

Shrinkage: .001

Color: Semi-Clear or Black

Hardness: 70-A

Viscosity: 700 cps

SAFETY DATA SHEET

ORDER ONLINE

Flex-It 80 is a  flexible urethane casting resin designed for casting flexible molds, seals, gaskets, models, prototypes, parts, etc.. It has excellent tear strength, elongation, tensile strength, and good chemical resistance.

Product: Flex-It 80

Mix Ratio: 1:1 by weight / volume

Working Time: 6.0 minutes

Demold Time: 2.0 Hour

Heat Deflection: 170 f 

Shrinkage: .001

Color: Semi-Clear or Black

Hardness: 80-A

Viscosity: 700 cps

SAFETY DATA SHEET

ORDER ONLINE

Flex-It 90 is a semi-rigid urethane casting resin designed for casting abrasion resistant molds, seals, gaskets, models, prototypes, parts, rollers, etc.. It is semi-rigid in mass castings and flexible in thin cross-sections. FLEX-IT 90 has excellent abrasion resistance, tear strength, tensile strength, and has good chemical resistance.  

Product: Flex-It 90

Mix Ratio: 1:1 by weight / volume

Working Time: 3.0 minutes

Demold Time: 1.5 Hour

Heat Deflection: 170 f 

Shrinkage: .001

Color: Semi-Clear or Black

Hardness: 90-A

Viscosity: 1000 cps

SAFETY DATA SHEET

ORDER ONLINE

Tough-Cast 65D is a two component polyurethane casting resin that is virtually indestructible. It exhibits excellent impact resistance, abrasion resistance, strength and chemical resistance. Tough-Cast 65D has the look and feel of thermoplastics such as abs while maintaining a high heat deflection. It is designed for making durable prototypes, reproductions, end use production parts, rollers, etc..  It contains zero solvents and can be hand mixed or used with automated dispensing equipment. Tough-Cast 65D works excellent in rtv silicone molds.

Product: Tough-Cast 65D

Mix Ratio: 1:1 by weight / volume

Working Time: 2.0 minutes

Demold Time: 30 minutes

Heat Deflection: 200 f 

Shrinkage: .001

Color: Amber or Black

Hardness: 65-D

Viscosity: 500 cps

SAFETY DATA SHEET

ORDER ONLINE

Epox-It 80 is a multi-purpose high gloss clear epoxy resin. It has an easy to use 1:1 mix ratio that can be hand mixed or used with automated dispensing equipment. Product uses include: coating bar tops, coating counters, encapsulation, fiberglass laminating, making clear models, prototypes, jewelry, figurines, etc.. This is ideal resin for professional contractors, boat builders, diy homeowners, model makers, hobbyists, crafters, and taxidermists.

Note: Epox-It 80 will yellow in direct sunlight over time, but it does resist yellowing better than most other epoxies. The fact is that all epoxy resins will yellow over time in direct sunlight some are better than others. Direct sunlight should be avoided to prolong the clarity of the resin.

Product: Epox-It 80

Mix Ratio: 1:1 by volume

Working Time: 45 minutes

Demold Time: 24 hours

Shrinkage: .001

Color: Clear

Hardness: 80-D

Viscosity: 2600 cps

SAFETY DATA SHEET

ORDER ONLINE

Model-Pro Casting Resin